PRODUCT MENU

TL-415 & TL-420 Recessed Truck Levelers

These truck dock levelers have the cylinders mounted completely out of the way beneath the platform. The travel on these truck dock levelers is typically divided with 18″up travel and 18″ down travel, but the pit profile can be changed to provide other travel combinations. Built-to-last, our recessed loading dock levelers are suitable for a range of applications. Inquire about our hydraulic loading dock levelers for sale today.

Recessed-Truck-TL-415 & TL-420_Levelers

TL-415 & TL-420 Recessed Truck Levelers
Recessed Dock Lifts (Disappearing Docks)
Recessed Dock Lifts (Disappearing Docks)
Recessed Dock Lifts (Disappearing Docks)

SPECIFICATION TABLE FOR RECESSED TRUCK LEVELERS:

ModelCapacityPlatform SizeTravelHorse PowerSpeedWeightOverall WidthOverall Length
TL-4156000010′ x 15′36″53580010′ 2″15′ 8-3/4″
TL-4206000010′ x 20′36″53730010′ 2″20′ 8-3/4″

TL-415&TL-420_Diagram

INSTALLATION REQUIREMENTS:

1. A crane that can reach the center of the platform with a capacity of 3,000 lbs. for a TL-415 or 3,500 lbs. for a TL-420 will be required.
2. Typically it takes two men and two days to complete an installation.
3. All welding is in the flat position.

NOTE:

1. Steel faced dock bumpers are preferred because of the vertical movement of trucks against the bumpers.
2. “Edge of dock” devices are often used to span the gap between the dock and truck bed.
3. A 24″ X 24″ opening is available to accommodate truck restraints. Consult the factory if your requirements exceed those dimensions.

Call the number below for more information on our truck dock levelers.

1-800-843-3625

Sales@advancelifts.com | Parts@advancelifts.com

LOWER COST DUE TO LONGER LIFE

701 S. Kirk Road • St. Charles, IL 60174 • Toll Free 1-800-843-3625 • Fax: 630-584-9405
© Copyright 2024 Advance Lifts, Inc.
Privacy Policy

Top