Advance Lifts
   


8,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

These units are tilters that tilt a full ninety (90) degrees. It is common to equip one platform with a "V" cradle to hold coils or rolls. When this is done we leave a gap of 6", or whatever the customer specifies, to accommodate a pallet at the bottom face of the coil or roll. The upender is the called a roll "palletizer" or "depalletizer". Lifts have been mounted on one of the platforms and so have turntables. If a turntable is mounted, it usually has to be mounted on slides so that it can be pulled away from the adjacent perpendicular face in order to turn a square cornered load.


 

Model# UE-890
  • Capacity: 8,000 lbs.
  • Lowered Height: 14 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Tilt Speed: 91 sec.
  • Internal Motor: 5 HP
  • Shipping Weight: 4,000 lbs.
 

 

Special Features and Benefits

  • All models have hydraulic return lines on the cylinders to preclude oil weepage.
  • The controllers are assembled in our U.L. approved panel shop.
  • All shafts, axles and pins are hard chrome plated.
  • All bearings are lifetime lubricated.
  • These units are fully primed and finished with baked enamel.

 


Feature Details
UL Approved
Controller
Cylinder
Double Wire
Braid Hose
Power Unit

For current pricing please contact your local distributor