Advance Lifts
   


10,000 lb. Capacity

10 Year and 250,000 Cycle Structural Warranty

These units are tilters that tilt a full ninety (90) degrees. It is common to equip one platform with a "V" cradle to hold coils or rolls. When this is done we leave a gap of 6", or whatever the customer specifies, to accommodate a pallet at the bottom face of the coil or roll. The upender is the called a roll "palletizer" or "depalletizer". Lifts have been mounted on one of the platforms and so have turntables. If a turntable is mounted, it usually has to be mounted on slides so that it can be pulled away from the adjacent perpendicular face in order to turn a square cornered load.


 

Model# UE-1090
  • Capacity: 10,000 lbs.
  • Lowered Height: 16 in.
  • Tilt Degrees: 90
  • Min. Platform Width: 48 in.
  • Min. Platform Length: 54 in.
  • Max. Platform Width: 60 in.
  • Max. Platform Length: 72 in.
  • Tilt Speed: 124 sec.
  • Internal Motor: 5 HP
  • Shipping Weight: 4,300 lbs.
 

 

Special Features and Benefits

  • All models have hydraulic return lines on the cylinders to preclude oil weepage.
  • The controllers are assembled in our U.L. approved panel shop.
  • All shafts, axles and pins are hard chrome plated.
  • All bearings are lifetime lubricated.
  • These units are fully primed and finished with baked enamel.

 


Feature Details
UL Approved
Controller
Cylinder
Double Wire
Braid Hose
Power Unit

 

For current pricing please contact your local distributor
For budgetary pricing please note the model number shown above and click here.e.